- Jan 11, 2018 -
Instructions for the use of a mobile power supply
1, the output voltage range of the mobile power supply, some devices, although there is USB interface, and also need you to use a mobile power supply. However, you should pay attention to the voltage range of the input of your device. The voltage output range of the universal mobile power supply is 5 + 0.5V. If the input voltage range of your device is not in the range of mobile power, it is recommended that you do not use mobile power to supply power to your device, so as to ensure the life of your mobile power.
2, the USB joint must be matched because various USB data lines correspond to different devices. So, in order to use the mobile power supply to power your device normally, please use the matched USB data interface.
3, the placement of mobile power environment, all kinds of electrical appliances need to be placed in a dry, less air humidity environment and humidity of the environment is unfavorable, to save all kinds of appliances so in order to use your mobile power life, as mobilepower is placed in a dry environment.
4. Often use your mobile power supply, charge and discharge a mobile power supply once a month and often use it. The service life of the mobile power supply can be improved to the maximum extent.
5, prevent the shock from falling. Mobile power is in fact a weak part of the internal components not beat. In particular, avoid careless landing in the process of use. Do not throw, knock, or shake the mobile power. The rough treatment of the mobile power supply will destroy the internal circuit board.
6, prevent cold and prevent heat. Do not put the mobile power in a place where the temperature is too high. High temperature can shorten the life of the electronic devices, destroy the mobile power supply, and make some plastic parts deformed or melted. Do not store the mobile power in an undercooled area. When the mobile power is working in the supercooled environment, when the internal temperature rises, the tidal gas will be formed in the mobile power supply, and the circuit board will be destroyed.
7. Anti - chemical products. Do not use strong chemicals, cleaning agents, or strong detergents to clean the mobile power supply. The cleaning of the appearance of the mobile power supply can be scrubbed with a small amount of anhydrous alcohol in cotton.